FOKKER F-28 Fellowship Specs refer to the technical specifications and characteristics of the Fokker F-28 Fellowship, a regional jet aircraft manufactured by the Dutch aerospace company Fokker. These specifications define the aircraft’s performance, dimensions, and capabilities.
The F-28 Fellowship was a successful regional jet, known for its versatility, reliability, and efficiency. It was widely used by airlines around the world for short- to medium-haul flights. The aircraft had a spacious cabin, comfortable seating, and a range of up to 1,800 nautical miles.
The key specifications of the Fokker F-28 Fellowship include:
- Length: 98 ft 4 in (30.0 m)
- Wingspan: 79 ft 10 in (24.3 m)
- Height: 33 ft 3 in (10.1 m)
- Maximum takeoff weight: 66,000 lbs (30,000 kg)
- Cruising speed: 470 mph (756 km/h)
- Range: 1,800 nautical miles (3,334 km)
- Capacity: 65-85 passengers
FOKKER F-28 Fellowship Specs
The Fokker F-28 Fellowship was a successful regional jet aircraft manufactured by the Dutch aerospace company Fokker. It was known for its versatility, reliability, and efficiency. The aircraft’s specifications played a crucial role in its success, and some of the key aspects of the F-28 Fellowship specs include:
- Dimensions: The F-28 Fellowship had a length of 98 ft 4 in (30.0 m), a wingspan of 79 ft 10 in (24.3 m), and a height of 33 ft 3 in (10.1 m).
- Weight: The maximum takeoff weight of the F-28 Fellowship was 66,000 lbs (30,000 kg).
- Performance: The aircraft had a cruising speed of 470 mph (756 km/h) and a range of 1,800 nautical miles (3,334 km).
- Capacity: The F-28 Fellowship could accommodate 65-85 passengers, depending on the configuration.
- Engines: The aircraft was powered by two Rolls-Royce Spey turbofan engines.
- Avionics: The F-28 Fellowship was equipped with advanced avionics for the time, including a weather radar, autopilot, and navigation systems.
These specifications allowed the F-28 Fellowship to operate efficiently on short- to medium-haul routes. The aircraft was popular with airlines around the world, and it remained in service for many years. The F-28 Fellowship’s success is a testament to the importance of careful design and engineering in aircraft manufacturing.
Dimensions
The dimensions of the Fokker F-28 Fellowship were crucial to its performance and capabilities. The aircraft’s length, wingspan, and height were carefully designed to optimize aerodynamic efficiency, payload capacity, and handling characteristics.
The F-28 Fellowship’s relatively short length and high wingspan gave it a high aspect ratio, which reduced drag and improved fuel efficiency. The aircraft’s compact size also made it suitable for operation on short runways, which was important for regional airports.
The F-28 Fellowship’s wingspan was designed to provide sufficient lift while minimizing drag. The aircraft’s wings were also equipped with high-lift devices, such as flaps and slats, which improved takeoff and landing performance.
The F-28 Fellowship’s height was optimized to accommodate the aircraft’s engines, landing gear, and passenger cabin. The aircraft’s relatively low height made it easier to load and unload passengers and cargo.
Overall, the dimensions of the Fokker F-28 Fellowship were carefully designed to meet the specific requirements of regional jet operations. The aircraft’s compact size, high aspect ratio, and optimized wingspan and height contributed to its efficiency, performance, and overall success.
Weight
The maximum takeoff weight of an aircraft is a crucial specification that directly impacts its performance and capabilities. In the case of the Fokker F-28 Fellowship, its maximum takeoff weight of 66,000 lbs (30,000 kg) played a significant role in determining the aircraft’s payload capacity, range, and overall efficiency.
A higher maximum takeoff weight allows an aircraft to carry more weight, including passengers, cargo, and fuel. This is particularly important for regional jet aircraft like the F-28 Fellowship, which are designed to operate on short to medium-haul routes. A higher payload capacity enables airlines to maximize revenue by carrying more passengers and cargo on each flight.
However, a higher maximum takeoff weight also comes with certain trade-offs. A heavier aircraft requires more thrust to take off and climb, which can increase fuel consumption. Additionally, a heavier aircraft may have a shorter range, as it will need to carry more fuel to cover the same distance.
The engineers at Fokker carefully considered these factors when designing the F-28 Fellowship. They optimized the aircraft’s weight to achieve the best balance between payload capacity, range, and fuel efficiency. The maximum takeoff weight of 66,000 lbs (30,000 kg) was determined to be the ideal weight for the aircraft’s intended role and market.
In conclusion, the maximum takeoff weight of the Fokker F-28 Fellowship was an important specification that influenced the aircraft’s performance, payload capacity, range, and efficiency. Fokker’s careful design and optimization ensured that the F-28 Fellowship was well-suited for its intended role as a successful regional jet aircraft.
Performance
The performance specifications of the Fokker F-28 Fellowship were crucial to its success as a regional jet aircraft. The aircraft’s cruising speed of 470 mph (756 km/h) and a range of 1,800 nautical miles (3,334 km) made it well-suited for short to medium-haul routes.
The F-28 Fellowship’s high cruising speed allowed it to compete with larger jet aircraft on shorter routes. This made it an attractive option for airlines looking to offer faster service on regional routes. The aircraft’s range of 1,800 nautical miles (3,334 km) also gave it the flexibility to operate on longer routes, such as transcontinental flights within the United States.
The combination of speed and range made the F-28 Fellowship a versatile aircraft that could be used for a variety of missions. Airlines could use it to offer fast and efficient service on short-haul routes, while also having the flexibility to operate on longer routes when needed. This versatility was one of the key factors that contributed to the F-28 Fellowship’s success.
In conclusion, the performance specifications of the Fokker F-28 Fellowship were an important part of its overall design and capabilities. The aircraft’s high cruising speed and range made it well-suited for short to medium-haul routes, giving airlines the flexibility to offer fast and efficient service to their passengers.
Capacity
The passenger capacity of an aircraft is a key specification that influences its overall design and capabilities. In the case of the Fokker F-28 Fellowship, its capacity of 65-85 passengers, depending on the configuration, played a significant role in determining the aircraft’s role and market positioning.
- Single-class configuration: The F-28 Fellowship could accommodate up to 85 passengers in a single-class configuration, with all seats arranged in economy class. This configuration was typically used by low-cost airlines and charter operators looking to maximize passenger capacity and revenue.
- Dual-class configuration: The F-28 Fellowship could also be configured with two classes of service, typically business class and economy class. In this configuration, the aircraft could accommodate around 65 passengers, with a dedicated business class cabin offering more legroom, wider seats, and other amenities.
- Mixed-use configuration: The F-28 Fellowship’s flexible design allowed for mixed-use configurations, combining passenger and cargo space. This configuration was often used by regional airlines and cargo operators looking to maximize the aircraft’s versatility and revenue potential.
The F-28 Fellowship’s capacity of 65-85 passengers made it well-suited for short to medium-haul routes, where it could offer a comfortable and efficient travel experience. The aircraft’s flexible configuration options allowed airlines to tailor the aircraft to their specific needs and market demands.
Engines
The engines are a crucial component of the Fokker F-28 Fellowship’s specifications. The aircraft is powered by two Rolls-Royce Spey turbofan engines, which provide the thrust necessary for takeoff, climb, and cruise flight. The Spey engines are known for their reliability, efficiency, and performance, making them an ideal choice for the F-28 Fellowship.
The Rolls-Royce Spey turbofan engines are specifically designed for regional jet aircraft, providing a combination of high thrust and low fuel consumption. The engines are mounted on the rear of the fuselage, and their exhaust is directed through the tailpipe. The Spey engines provide excellent performance at both low and high altitudes, making the F-28 Fellowship well-suited for a variety of operating conditions.
The choice of Rolls-Royce Spey turbofan engines for the Fokker F-28 Fellowship was a result of careful consideration and analysis. The engines provide the aircraft with the power and efficiency needed to meet its performance requirements. The Spey engines are also known for their reliability and low maintenance costs, which are important factors for airlines operating the F-28 Fellowship.
Avionics
The avionics suite of the Fokker F-28 Fellowship played a crucial role in enhancing the aircraft’s capabilities and safety during operation. As a component of the F-28 Fellowship’s specifications, the advanced avionics significantly contributed to the overall performance and efficiency of the aircraft.
The weather radar provided real-time information about weather conditions along the flight path, allowing pilots to make informed decisions regarding route adjustments or altitude changes to avoid severe weather. This enhanced safety and reduced the risk of encountering hazardous weather conditions.
The autopilot system automated the control of the aircraft during various phases of flight, reducing pilot workload and improving overall efficiency. The autopilot’s ability to maintain a stable flight path and altitude freed up pilots to focus on other critical tasks, such as monitoring the aircraft’s systems and communicating with air traffic control.
The navigation systems, including advanced radio navigation aids and inertial navigation systems, provided accurate and reliable guidance to pilots during all stages of flight. These systems ensured precise navigation, even in challenging conditions, and facilitated efficient route planning and execution.
In summary, the advanced avionics suite of the Fokker F-28 Fellowship was an integral part of the aircraft’s specifications, enhancing safety, efficiency, and overall performance. The integration of weather radar, autopilot, and navigation systems provided pilots with the necessary tools to operate the aircraft effectively and safely, contributing to the F-28 Fellowship’s success as a regional jet.
FAQs about Fokker F-28 Fellowship Specs
This section addresses frequently asked questions about the Fokker F-28 Fellowship’s specifications, providing concise and informative answers to common inquiries.
Question 1: What is the maximum takeoff weight of the Fokker F-28 Fellowship?
The maximum takeoff weight of the Fokker F-28 Fellowship is 66,000 lbs (30,000 kg).
Question 2: What is the cruising speed of the Fokker F-28 Fellowship?
The Fokker F-28 Fellowship has a cruising speed of 470 mph (756 km/h).
Question 3: What is the range of the Fokker F-28 Fellowship?
The Fokker F-28 Fellowship has a range of 1,800 nautical miles (3,334 km).
Question 4: How many passengers can the Fokker F-28 Fellowship accommodate?
The Fokker F-28 Fellowship can accommodate 65-85 passengers, depending on the configuration.
Question 5: What type of engines does the Fokker F-28 Fellowship use?
The Fokker F-28 Fellowship is powered by two Rolls-Royce Spey turbofan engines.
Question 6: What are the key advantages of the Fokker F-28 Fellowship’s avionics suite?
The Fokker F-28 Fellowship’s avionics suite enhances safety, efficiency, and overall performance through advanced features such as weather radar, autopilot, and precise navigation systems.
These FAQs provide a concise overview of the Fokker F-28 Fellowship’s key specifications, addressing common questions and highlighting the aircraft’s capabilities.
Transition to the next article section.
Tips for Utilizing Fokker F-28 Fellowship Specifications
Understanding and effectively utilizing the specifications of the Fokker F-28 Fellowship aircraft is crucial for safe and efficient operation. Here are some essential tips to consider:
Tip 1: Familiarize Yourself with Weight and Balance Limitations
Thoroughly review the aircraft’s weight and balance limitations, ensuring that the aircraft is loaded within the specified parameters. This includes calculating weight and balance for different passenger and cargo configurations.
Tip 2: Optimize Payload and Range
Plan flight operations to optimize payload and range based on the aircraft’s specifications. Consider factors such as passenger load, cargo weight, and fuel requirements to maximize efficiency and avoid exceeding weight limits.
Tip 3: Understand Performance Characteristics
Study the aircraft’s performance charts and limitations to fully understand its capabilities. This includes knowing the aircraft’s takeoff and landing distances, climb rates, and cruise speeds under different operating conditions.
Tip 4: Utilize Advanced Avionics Features
Take full advantage of the F-28 Fellowship’s advanced avionics suite. Utilize the weather radar to identify and avoid hazardous weather conditions, and rely on the autopilot to reduce pilot workload and enhance flight stability.
Tip 5: Adhere to Maintenance and Inspection Schedules
Strictly adhere to the aircraft’s maintenance and inspection schedules as outlined in the manufacturer’s guidelines. Regular maintenance and inspections help ensure the aircraft’s continued airworthiness and safety.
Summary
By following these tips and thoroughly understanding the Fokker F-28 Fellowship’s specifications, pilots and operators can optimize the aircraft’s performance, safety, and efficiency. Proper utilization of the aircraft’s capabilities ensures a successful and reliable operation.
Conclusion
The Fokker F-28 Fellowship’s specifications played a vital role in its success as a regional jet aircraft. Its dimensions, weight, performance, capacity, engines, and avionics suite were carefully designed to meet the specific requirements of short to medium-haul routes. The aircraft’s efficiency, reliability, and versatility made it a popular choice among airlines around the world.
Understanding and effectively utilizing the F-28 Fellowship’s specifications is crucial for safe and efficient operation. By adhering to weight and balance limitations, optimizing payload and range, understanding performance characteristics, utilizing advanced avionics features, and following maintenance and inspection schedules, pilots and operators can maximize the aircraft’s capabilities and ensure its continued airworthiness.
The Fokker F-28 Fellowship remains a significant aircraft in the history of aviation, and its legacy continues to influence the design and operation of regional jet aircraft today.